01 / module
Eight HUB75E module connections
Both models provide eight standard HUB75E connectors and up to sixteen groups of parallel RGB data. Check the exact pin definitions before matching the receiving card to the LED modules.
商品情報にスキップ
受信カード MRVシリーズ
$16.87
Two HUB75E receiving cards with shared PWM loading limits and different physical layouts for cabinet integration.
Match the MRV328 board layout
Match the MRV328 mounting drawing to the 145.6 × 95.5 × 18.3 mm board. Its documented PWM load is 256 × 256 at 60 Hz and it supports up to 1/32 scan. Check HUB75E pin definitions before replacing a card.
HUB75E cabinet designs with PWM driver ICs配送と納期
- DHLエクスプレス
- 1～3営業日で処理
- DAP（関税・諸税別）
詳細は配送ポリシー →をご確認ください。
サービス＆サポート
製品選定、互換性、構成、インストール、およびアフターサービスに関するサポートを提供いたします。
お問い合わせ: service@absen.com
受信カード MRVシリーズ
$16.87
Compare the board layout as well as the loading limit
MRV328 and MRV208-1 both provide eight HUB75E module connections and up to sixteen parallel RGB data groups. Their documented PWM loading limit is 256 × 256 at 60 Hz. Compare the exact board dimensions, mounting drawing and required feature conditions before choosing a replacement or new cabinet design.
Module connections and cabinet integration
02 / frame
Keep PWM loading conditions visible
Both models specify up to 256 × 256 at 60 Hz with PWM driver ICs. MRV328 additionally documents support for up to 1/32 scan.
03 / board
Match the exact mechanical layout
MRV328 and MRV208-1 have different board dimensions and mounting layouts. Use the model drawing when checking fit; a shared connector family does not establish a drop-in replacement.
04 / cascade calibration
Cascade and calibrate the system
Either Gigabit Ethernet port can serve as input or output for cascading. Both models support pixel calibration through NovaStar tools.
Check the module, network and cabinet interfaces
Check the module configuration
Match the HUB75E pin definitions, data-group allocation and PWM loading requirement to the selected card.
Connect the sending-card network
Use the Gigabit Ethernet ports to connect the sending card and cascade receiving cards. Either Ethernet port may serve as input or output.
Verify mounting and software conditions
Use the exact mechanical drawing for cabinet mounting. Check the documented controller and software conditions for 3D, calibration and diagnostic features.
Find your fit
Select your model.
|
Model selection
Choose a model to update the comparison.
|
||
|---|---|---|
| Receiving capacity | 256 × 256 at 60 Hz with PWM driver ICs. Supports up to 1/32 scan. | 256 × 256 at 60 Hz with PWM driver ICs. |
| Data groups | Up to 16 groups of parallel RGB data. | Up to 16 groups of parallel RGB data. |
| Input voltage | 3.8–5.5 V DC. V | 3.8–5.5 V DC. V |
| Rated power | 2.5 W | 2.5 W |
| Specifications | ||
| Product use | General LED receiving card with pixel-level brightness/chroma calibration, dark/bright-line adjustment and 3D output support. | General LED receiving card with pixel-level brightness/chroma calibration, dark/bright-line adjustment and 3D output support. |
| Compatibility | Connects to a sending card and cascades other receiving cards through Gigabit Ethernet; either Ethernet port can act as input or output. 3D requires a 3D-capable sending card/controller. Pixel calibration uses NovaStar calibration tools. Bit-error detection and firmware readback require NovaLCT V5.2.0 or later. | Connects to a sending card and cascades other receiving cards through Gigabit Ethernet; either Ethernet port can act as input or output. 3D requires a 3D-capable sending card/controller. Pixel calibration uses NovaStar calibration tools. Mapping requires NovaLCT. |
| Rated power | 2.5 W | 2.5 W |
| Input voltage | 3.8–5.5 V DC. V | 3.8–5.5 V DC. V |
| Dimensions | 145.6 × 95.5 × 18.3 mm; specification axis order is not labeled. Mounting section specifies maximum component envelope 19.0 mm. mm | 95.5 × 109.0 × 19.4 mm; specification axis order is not labeled. mm |
| Weight | 85.5 g | 71.7 g |
| Operating temperature | −20 to +70 °C; 10–90% RH, non-condensing. °C | −20 to +70 °C; 10–90% RH, non-condensing. °C |
| Installation | Use the grounded mounting holes and exact structural drawing for cabinet integration. Obtain the higher-precision drawing from NovaStar for mold tooling or mounting-hole manufacture. | Use the grounded mounting holes and exact structural drawing for cabinet integration. Obtain the higher-precision drawing from NovaStar for mold tooling or mounting-hole manufacture. |
| Receiving capacity | 256 × 256 at 60 Hz with PWM driver ICs. Supports up to 1/32 scan. | 256 × 256 at 60 Hz with PWM driver ICs. |
| Data groups | Up to 16 groups of parallel RGB data. | Up to 16 groups of parallel RGB data. |
| Interface type | Eight standard HUB75E connectors for LED modules, Gigabit Ethernet input/output ports, input-power connectors and a 5-pin LCD connector. | Eight standard HUB75E connectors for LED modules, Gigabit Ethernet input/output ports, input-power connectors and a 5-pin LCD connector. |
Check the stated conditions for each model before comparing values.
FAQ
Frequently asked questions
Are MRV328 and MRV208-1 mechanically interchangeable?
The specifications give different dimensions and mounting drawings. Their shared HUB75E connection type is not evidence of a drop-in replacement. Match the exact mechanical drawing and module connections to the cabinet.
What condition applies to the 256 × 256 loading limit?
Both exact-model documents state 256 × 256 at 60 Hz for PWM driver ICs. Preserve the driver and frame-rate conditions when comparing the cards; the figure is not a general LED refresh-rate specification.
What additional condition applies to 3D output?
The receiving card must work with a sending card or controller that supports 3D. The receiving-card feature list alone does not establish that the rest of the display system supports a 3D workflow.
How do the Ethernet and HUB75E connections work?
Both models provide eight HUB75E module connectors and Gigabit Ethernet ports; either Ethernet port can act as input or output when cascading receiving cards.
Are the software requirements identical?
No. MRV328 documents NovaLCT V5.2.0 or later for bit-error detection and firmware readback. MRV208-1 documents NovaLCT for mapping. Use the exact-model workflow.
CONTACT
Discuss your configuration
Send the exact model and your project requirements to discuss the next step.
Contact sales