01 / channels
16 constant-current outputs
A single external resistor sets the current for all 16 channels. The allowed current range changes with the supply voltage.
제품 정보로 건너뛰기
IC
$0.50
ICND2153 provides 16 PWM constant-current outputs for multiplexed full-color LED displays, in the SSOP package listed for this part.
16Driver channels
Match the SSOP footprint
Use the SSOP24 AP pin assignment and package outline. The QFN variants in the same datasheet have different pin arrangements and are not a footprint substitute.
Multiplexed LED display circuitsShipping & delivery
- DHL Express
- 1–3 business days processing
- DAP ( duties & taxes not included )
Learn more in our Shipping Policy →
Service & support
Get support with product selection, compatibility, configuration, installation and after-sales service.
Contact us: service@absen.com
IC
$0.50
LED drive
Control the current behind the pixels
ICND2153 converts serial input data into PWM grayscale output for multiplexed LED displays. Sixteen constant-current channels share an external current-setting resistor. The listed material uses SSOP packaging, so check the AP pinout rather than using the QFN diagrams.
Key functions
Driver functions with defined conditions
Set the output current and scan scheme to match the LED circuit.
02 / scan
1–32 scan support
The device supports time-multiplexed drive for 1–32 scan applications. Serial input data is converted into pixel grayscale through the 16-bit shift register.
03 / correction
Integrated display corrections
LED open detection and pre-charge circuitry address open-LED effects and ghosting, with additional low-gray enhancement.
04 / current matching
Keep channel current consistent
Channel-to-channel and chip-to-chip current error is specified at ±1.0% typical and ±2.0% maximum for consistent output current.
Circuit integration
Match the package and drive signals
Use the AP pinout for the SSOP part. Connect the serial data, clocks, latch/command input, current-setting resistor and constant-current outputs as specified in the datasheet.
Find your fit
Select your model.
|
Model selection
Choose a model to update the comparison.
|
|
|---|---|
| Chip package | SSOP24 (AP); 0.635 mm lead pitch. The datasheet also covers QFN24 variants with different pinouts. |
| Scan modes | 1–32 scan time multiplexing |
| Interface type | Serial data input SIN, data clock DCLK, command input LE, PWM clock GCLK, serial output SDO and 16 constant-current outputs. |
| Input voltage | 3.3–5.0 V (VDD supply range in feature summary; 6 V is an absolute maximum, not an operating value) |
| Specifications | |
| Product use | 16-channel PWM constant-current LED sink driver for multiplexed full-color LED displays. |
| Compatibility | Common-anode LED display drive; SSOP package specified by the local material record. Match the AP pinout and circuit requirements before replacement. |
| Input voltage | 3.3–5.0 V (VDD supply range in feature summary; 6 V is an absolute maximum, not an operating value) |
| Dimensions | D 8.45–8.85; E1 3.80–4.00; E 5.80–6.20; A ≤1.75; lead pitch 0.635 mm (SSOP24 AP package: body length D, body width E1, overall width E, height A) |
| Weight | 0.13 g (SSOP24 ICND2153AP; source 130 mg, converted exactly to g) |
| Operating temperature | -40 to +85 °C (Manufacturer ICND2153 rating; local catalog description says +80 °C) |
| Installation | SSOP24 surface-mount package; use the AP pinout and package drawing for the PCB footprint. |
| Interface type | Serial data input SIN, data clock DCLK, command input LE, PWM clock GCLK, serial output SDO and 16 constant-current outputs. |
| Application | Multiplexed full-color LED display drive. |
| Output channels | 16 |
| Channel current | 0.5–25 mA (Per channel at VDD = 5 V; max 18 mA at 4.2 V and 10 mA at 3.3 V) |
| Scan modes | 1–32 scan time multiplexing |
| Grayscale | 16-bit serial input/shift register converted to pixel grayscale; 8-bit current gain adjustment. |
| Chip package | SSOP24 (AP); 0.635 mm lead pitch. The datasheet also covers QFN24 variants with different pinouts. |
| Current accuracy | Channel-to-channel and chip-to-chip error < ±2.0% maximum; table gives ±1.0% typical, ±2.0% maximum. (See datasheet electrical test conditions; typical values are not guarantees) |
| Protection | LED open detection, pre-charge ghost reduction, low-gray enhancement and integrated LED protection circuit. |
| Refresh rate | 3840 Hz (Manufacturer summary for driver; not a guaranteed assembled-screen refresh rate) |
자주 묻는 질문
Frequently asked questions
Which package applies to this material?
The original material record specifies SSOP. In the Chipone datasheet this corresponds to ICND2153AP / SSOP24. QFN24 variants have different pinouts; check the package before replacement.
Does every supply voltage support 25 mA per channel?
No. The datasheet lists 0.5–25 mA at 5 V, 0.5–18 mA at 4.2 V and 0.5–10 mA at 3.3 V. Use the range and circuit conditions appropriate to the actual supply.
What scan modes are supported?
The device supports 1–32 scan time multiplexing. This describes the driver capability and does not by itself specify the resolution or refresh performance of a complete display.
Which control and data signals must the PCB provide?
The documented interface includes SIN serial data, DCLK data clock, LE command input, GCLK PWM clock, SDO serial output and 16 constant-current outputs.
Which datasheet is available for design review?
The current download is the English ICND2153 Driver Datasheet, revision 1.4 dated July 2020. Use its AP/SSOP24 pinout and package drawing for the PCB footprint.
Replacement check
Match the part to your LED board
Share the existing chip marking, package and PCB details to check the replacement requirement.
Contact sales