01 / load
Size the load for the video bit depth
CA50E specifies 768 × 512 at 60 Hz for 8-bit or 10-bit video and 512 × 480 at 60 Hz for 12-bit video. Preserve these conditions when planning each cabinet.
التخطي إلى معلومات المنتج
بطاقة الاستقبال — CA Series
$122.34
A 5G COEX receiving card with loading limits defined by video bit depth and a manufacturer-required solution evaluation.
Evaluate the COEX cabinet design
Select CA50E after the required manufacturer solution evaluation. Match bit depth, per-card loading, hub-board connection and driver-dependent functions to the design.
COEX cabinet designs requiring 5G receivingShipping & delivery
- DHL Express
- 1–3 business days processing
- DAP ( duties & taxes not included )
Learn more in our Shipping Policy →
Service & support
Get support with product selection, compatibility, configuration, installation and after-sales service.
Contact us: service@absen.com
بطاقة الاستقبال — CA Series
$122.34
Plan the receiving card within the COEX system
CA50E combines a 5G receiving interface with high-density board connections for COEX installations. It supports thermal compensation, calibration and HDR-related processing, subject to the required equipment and driver conditions. Confirm the video bit depth and cabinet design before sizing the load.
Capacity and processing with explicit conditions
02 / image
Coordinate calibration and driver support
Thermal compensation and full-grayscale calibration are supported. Full-grayscale calibration needs the specified calibration system and C3200 camera; Image Booster effects depend on the driver IC.
03 / design
Evaluate the complete COEX design
NovaStar requires solution evaluation before CA50E use. Confirm the high-density connector pin-out, 5G signal path, cabinet clearance and any firmware-specific functions.
04 / data fanout
Plan RGB data fan-out
CA50E supports up to 32 parallel RGB groups or 64 serial groups, expandable to 128 serial groups.
Confirm the system before integration
Request the manufacturer evaluation
Provide the intended COEX and cabinet configuration for the solution evaluation required by the CA50E document.
Check bit depth and per-card loading
Match the video bit depth to the documented capacity before allocating cabinet pixels to receiving cards.
Verify the hub board and processing conditions
Use the exact connector pin-out and mounting drawing. Check the calibration equipment, driver IC and firmware requirements for each intended image function.
Find your fit
Select your model.
|
Model selection
Choose a model to update the comparison.
|
|
|---|---|
| Receiving capacity | 768 × 512 at 60 Hz for 8-bit and 10-bit video; 512 × 480 at 60 Hz for 12-bit video. |
| Data groups | Up to 32 parallel RGB groups or 64 serial groups, expandable to 128 serial groups. |
| Interface type | High-density board connectors carrying RGB data and 5G Ethernet signals; use the model pin-out for the hub-board design. |
| Rated power | 6.8 W |
| Specifications | |
| Product use | High-end 5G receiving card for NovaStar COEX LED-control systems, with thermal compensation, full-grayscale calibration and HDR processing support. |
| Compatibility | Part of the COEX control system; NovaStar requires solution evaluation before use. Full Grayscale Calibration uses the high-precision calibration system and C3200 camera. LED Image Booster effects depend on the driver IC. One-frame receiving-card latency requires driver ICs with built-in RAM. 3D requires a 3D-capable controller; LVDS requires dedicated firmware. |
| Rated power | 6.8 W |
| Input voltage | 3.8–5.5 V DC; the connector definition recommends 5.0 V. V |
| Dimensions | 80.0 × 45.0 × 8.6 mm in the specification table; axis order is not labeled. Allow the page-5 stated total component thickness limit of 9.2 mm for mounting clearance. mm |
| Weight | 25.5 g |
| Operating temperature | −20 to +70 °C. °C |
| Installation | Mount on a compatible hub board using the high-density connectors and grounded mounting holes. Total board-plus-component thickness is stated as no greater than 9.2 mm. Obtain the higher-precision structural drawing from NovaStar for mold or mounting-hole manufacture. |
| Receiving capacity | 768 × 512 at 60 Hz for 8-bit and 10-bit video; 512 × 480 at 60 Hz for 12-bit video. |
| Data groups | Up to 32 parallel RGB groups or 64 serial groups, expandable to 128 serial groups. |
| Interface type | High-density board connectors carrying RGB data and 5G Ethernet signals; use the model pin-out for the hub-board design. |
Check the stated conditions for each model before comparing values.
الأسئلة الشائعة
Frequently asked questions
Does CA50E loading capacity change with bit depth?
Yes. The specification states up to 768 × 512 at 60 Hz for 8-bit and 10-bit video, and up to 512 × 480 at 60 Hz for 12-bit video. These are per-card limits with the stated video conditions.
Can CA50E be selected from its interface alone?
NovaStar explicitly asks users to obtain solution evaluation before using CA50E. Confirm the COEX setup, hub-board design and required processing functions rather than assuming any connector match establishes compatibility.
What is required for the stated one-frame latency?
The low-latency feature reduces latency at the receiving-card end to one frame only with driver ICs that include built-in RAM. This statement does not establish the latency of the complete video system.
What mechanical and electrical details are needed for hub-board integration?
Use the CA50E pin-out and structural drawing. The specification lists 80.0 × 45.0 × 8.6 mm, a total component-thickness limit of 9.2 mm, and 3.8–5.5 V DC input with 5.0 V recommended in the connector definition.
What prerequisites apply to calibration and image-processing features?
Full Grayscale Calibration uses the NovaStar high-precision calibration system and C3200 camera. LED Image Booster depends on the driver IC; 3D requires a 3D-capable controller.
CONTACT
Discuss your configuration
Send the exact model and your project requirements to discuss the next step.
Contact sales